Before making any permanent fixtures Warmup recommends
progressing through to
‘Step 3 - Paring and Testing’
upon
identifying preferred locations for the
Boiler Receiver
and
Power
Base
. This will ensure the wireless connection is not subject to
range or interference issues once installed.
The
Boiler Receiver
should be installed within the Boiler’s vicinity.
Large metal objects such as the boiler, hot water cylinder or
radiators, should be at least 300mm away from the
Boiler
Receiver
and not directly between it and the
Power Base
.
Loosen both screws at
the bottom of the
Boiler
Receiver
and remove
the backplate.
Fix the backplate to the
wall using fixing screws
provided.
Make sure to avoid cables or pipes
which may be concealed in the wall
!
Mounting/positioning
5iE
Step 1 - Install Boiler Receiver
NOTE:
For alternative installation configurations, see online at www.warmupsmart.com/installation
5
1
2
