Open the doors on either side of the LCD display in order
to access the controls. Set the On/Standby switch to ON.
If power has been applied for the first time:
Set the current time by using the hour and minute
buttons
Set the day by using the Day button
Comfort Temperature – the “ON” temperature
(This temperature has been preset as follows
21˚C for Air sensing controllers
28˚C for Floor sensing controllers
To change the Comfort temperature:
Select the new temperature using the arrow keys
Press and hold the sun button for 3 seconds
You will see this icon on the display.
Economy Temperature – the “OFF” temperature
(This temperature has been preset as follows
18˚C for Air sensing controllers
20˚C for Floor sensing controllers
To change the Economy temperature:
Select the new temperature using the arrow keys
Press and hold the moon button for 3 seconds
You will see this icon on the display.
1.
Press the Mode/Ret button - You will see the manual
icon on the display
2.
Now press the arrow keys for the temperature you
require
The manual temperature can also be set by using the
Comfort or Economy temperatures.
1.
Press the Mode/Ret button - You will see the manual
icon on the display
2.
Now press the sun (Comfort button) or the moon
(Economy button) – whichever may be preferred.
Eg
Comfort temperature from 7 am to 10pm
Economy temperature from 10pm to 7 am
Press Mode/Ret so that the automatic icon
can be seen on the display.
Set P1
1.
Select Pgm – you will now see the
house on 1 i.e.
2.
Select Day – for the day to be
programmed (Press and hold the Day
button for 3 seconds if you want to
set the same time for all days of the
week).
3.
Use the hour and minute buttons to
set the time. Eg 7am
Set P2
1.
Select Pgm – The house goes to
2.
Select Day – for the day to be
programmed (Press and hold the Day
button for 3 seconds if you want to
set the same time for all days of the
week).
3.
Use the hour and minute buttons to
set the time. Eg 10pm
Erase P3
Press Pgm – you can now see
Hold the day button and select all the days of
the week
and press Clear.
Erase P4
Press Pgm – you can now see
Hold the day button and select all days of the
week and then press Clear.
One temperature setting – for 24 hours
Two temperature settings
Model TH115 A/F/AF Programmable