5
By default, the digital display shows the currently measured
temperature. To go to the preview of the set temperature se ngs,
press the SET bu on. Then press the SET bu on again and use the +/-
bu ons to set the appropriate temperature.
7. Device opera on
A) Simple mode
Preview
temperature
set
Changing the se ngs
(+/- bu ons)
Current
temperature
+
-
SET
(1 press)
SET
(1 press)
B) Advanced mode
- "SC"
temperature calibra on
.
Then press the SET bu on again and use the +/- bu ons to change
the se ng values.
To change the se ngs in advanced mode, press the SET bu on un l
the appropriate "d", "delay" or "SC" appears on the display.
Advanced mode also allows you to change the following se ngs:
To start the advanced mode, hold the SET bu on for 5 seconds, then
use the +/- bu ons to select the appropriate opera ng mode and
confirm again with the SET bu on.
-
se ng the "COLD" cooling mode
,
-
hysteresis value
"d",
-
me delay
"delay”
-
se ng the "HOT" hea ng mode
,
Simple mode se ngs diagram