Save money by setting program schedules
This thermostat can be individual 7-day programmable. For each day of the week you are able to have 4 timed set temperature schedules.
Above are default program schedules, to make changes, follow easy steps as below.
Set to the time you would like to wake to and the temperature you want during the morning, until you left for the day.
Set to the time you leave home and the temperature you wish your home to maintain while you are away at work perhaps.
Set to the time you return home at end of the day and the temperature you want during evening until bed time.
Set to the time you sleep and the temperature you want overnight(usually a comfortable and energy saving temperature).
07:00
1
2
3
4
22 °C
16:30
22 °C
09:30
16 °C
22:30
16 °C
WAKE
Program
Start Time
Setpoint
Explanation
LEAVE
RETURN
SLEEP
This product should be
installedby a qualified
Carefully separate the front half of the thermostat
from the back plate by placing a small flat head
terminal driver into the slots on the bottom face of
the thermostat
1
Carefully unplug the ribbon connector
which is plugged in to the front half of
the thermostat
2
Place the thermostat front half somewhere
safe. Terminate the thermostat as shown
in the diagrams below
3
Screw the thermostat back
plate on to the back box
4
Re-connect the thermostat ribbon cable
and clip the two halves together
5
Installation and Wiring
Press
, you will see day display flashing.
Use or adjust the day to the day you wish to start programming
Press , the LCD will show program 1 with the time display flashing.
Use or adjust the time you wish the program 1 event to commence
Press , the LCD will show a temperature value flashing.
Use or set the desired heating temperature to be maintained for
Press , now the LCD will show program 2 with the time display
Repeat step 4,5,6 to set remaining programs. Press to store and exit.
Note: During setting programs, press (if visible) will clear a program entry
1.
2.
3.
4.
5.
5.
6.
6.
7.
8.
W
TR8200 Thermostat User Manual
(Press
to select all days of the week, to cancel selecting all days of
DONE
DONE
All Days
All Days
Set
Schedule
Temporary Temperature Override
Touch the temperature display, and it will start to flash. Use
or
to adjust. Press to accept, and you will see “O/RIDE” on LCD. Thermostat will maintain the
new set temperature until the next programmed event(comfort level). To cancel the override setting, press
Lock the Keypad
To lock the keypad, press and hold the bottom left corner of display for 5 seconds, you will see a lock symbol .
Reset to Factory Settings
With thermostat turned off, press and hold the up left corner of display for 5 seconds until you can see RESET on LCD.
To unlock, repeat the steps above.
DONE
Run
Schedule
Next
Next
Next
Next
Next
Next
Delete
until the beginning of the next program.
Note: It is faster to program the same schedule for the entire week and then to
adjust the exceptional days.
Set time and temperature for the next time period(Leave). Repeat steps 2 and 3
for each time period of the weekday.
In 7 day program mode
In 5+2 day program mode
flashing, signifying the second daily event is now being programmed.
the program 1 event.
for the currently selected day or days.
the week, press
again.)
or to the day you wish to edit an existing event or program.
Press
, you will see the time flashing.
Press to move to the weekend(sat-sun) time periods settings.
Use or to set your weekday Wake time(Mon-Fri), then press
1.
2.
3.
4.
Use or to set the temperature for this time period, then press
Set
Schedule
Press
to save and exit.
Day 1 - 5, refers to the weekday( Monday to Friday)
Day 6 - 7, refers to the weekend( Saturday and Sunday)
and thermostat will maintain the temperature setpoint of the last executed program
electrician.
