Warmos Werstas installation and user guide 3
Electrical connection
Once the heater has been mounted on the wall according to the given instructions, a qualified professional electrician
installs the heater in the junction box according to the attached picture. The installation must be carried out by an
electrician who has the necessary permits. A separate thermostat or an external temperature control system is needed to
control the heater. The thermostat is not a part of the radiator package. When choosing the thermostat, pay attention to
the ingress protection rating. If you choose a floor thermostat, mount it in a dry space and place the sensor on a wall in the
wet, dusty or fire-hazardous space at the height 1.5-1.7 meters.
In the silumin junction box:
•
Protective grounding is connected under the screw in the left hand side upper corner.
•
Working zero is connected to the N-connector.
•
Current temperature is connected to the L-connector.
Operation
The heater is a low-temperature model; its surface temperature rises to a maximum of 60 °C. The heater must not be
covered. If the surface temperature rises too high due to it being covered, for example, the overheating trigger in the
junction box switches off the electric current of the heater at 70 °C. The trigger will automatically reset itself after the
heater has cooled off. If the temperature does not rise enough even though the heater is continuously on
, the heater’s
power is too small for the space in question.
MANUFACTURER
Warmos Heating Ltd
Muurlantie 510
FI-25130 Muurla
P. +358 44 7217112