Installation Support • (800) 875-5285 • WarmlyYours
ACCESSORIES
1 PCS
4 PCS
3 PCS
4 PCS
3 PCS
1 PCS
3 PCS
1 PCS
2 PCS
a
c
d
e
i
j
k
f
g
h
INSTALLATION:
(
WARNING: The electrical
connection should avoid all water.)
Please refer to all the following steps if the wall
brackets are taken apart from the vertical bars.
Please refer to Steps 5-10 if the wall brackets are
fixed on vertical bars already.
1 PCS
b
INSTALLATION GUIDE
For TWS1-HRN08 hardwired towel warmers
STEP 1
STEP 1
:
Remove and set aside the set screws (c)
from the top of the main assembly.
STEP 2
:
Slide the mounting shelf's collared feet (k) over the
top of the main assembly so that the mounting shelf is
perpendicular to the main assembly.
Note: the hole's in the mounting shelf should face the same
direction as the wiring from the back of the main assembly.
STEP 3
:
Secure the mounting shelf (k) fto the main
assembly by using the set screws (c) from Step 1.
STEP 4
:
Insert the short mounting screw (d)
through the tube in the center of the mount-
ing tube (a).
c
STEP 2
k
STEP 3
k
c
STEP 4
