Bracket Assembly Instructions -
Portofi no
Step 1
Measure for position of brackets using the template if desired. At
least two brackets must attach to a stud.
Step 2
Affi x part
C
to the wall using screw
e
and drywall anchor
d
* where
necessary.** Slot in
C
should face downwards.
Repeat Step 2 for the three remaining brackets.
Step 3
Insert rubber pads
h
(2x) into
A
and
B
. Clamp
A
and
B
around the
Towel Warmer horizontal bar with
A
on the top. Insert screw
g
and
tighten.
Repeat Step 3 for the three remaining brackets.
Step 4
Hang Towel Warmer on the brackets and fi x in place by inserting
screw
f
.
* Drywall anchor need not be used when screwing into a stud.
** Actual drywall anchor may differ in appearance.
8
