Warmlite WL44014, Руководство по безопасности и инструкция

Страница: 6 / 12

6 CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
USING YOUR APPLIANCE
1. Plug the appliance to a 220-240V~ 5OHZ
socket in the wall.
2. To start the heater, push the on/off switch
located at the side of the appliance.
3. Pressing the button below the plug, at the
back of the appliance, allows you to rotate
the plug to 90°. Make sure the plug is
secure once this is done.
4. Push the Stand-by button to activate
the heater.
Heating:
1. Press “+” or “-” to set the desired
temperature, from 15° to 30°.The
thermostat will now regulate the heater
to turn on if the temperature is too low,
and off once the desired temperature is
reached.
2. Press the temperature “+” and “-” buttons
at the same time to speed up the fan or
slow it down. The display will flash for
a moment, showing the set number of
hours.
Turning off the Heater:
To turn your heater off at any time press the
Stand-By button. The heating element will stop
and the fan will operate for approximately 60
seconds, allowing your heater to cool down
before switching off.
Using the Timer:
1. Power-off: If you set the timer while the
heater is on, you set the number of hours
after which the heater turns itself off.
2. Power-on: If you set the timer while the
heater is set to stand-by, you set the
number of hours after which the heater
turns itself on.
3. For example, if you want to set the
countdown timer to 2 hours, press the
button 3 times. The LED will display the
number of hours.
4. Your heater will turn off automatically in 2
hours.
5. To stop the heater, push the ON/OFF
switch again.
UNPLUG THE PRODUCT WHEN IT’S NOT
IN USE.
CLEANING AND MAINTENANCE
• Be sure to turn off the appliance, switch
off the power supply at the wall socket
and disconnect the plug before attempting
to clean it.
• Wait for the heater to cool down fully
before attempting to clean it.
• ONLY clean the body of the heater with a
damp cloth.
• DO NOT ALLOW water into the appliance.
• Never use soap or chemicals which may
damage the housing of the heater.
• Allow sufficient drying time before
operating again.
• Clean the air inlets and outlets regularly
with a vacuum cleaner (at least twice a
year).
• When the unit is not in use we
recommend that the heater is re-packed
in its original packaging and stored in a
cool, dry place.
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART OF
THE APPLIANCE IN WATER SUCH AS MOTOR
UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION FOR
FURTHER INSTRUCTIONS.
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown here may
not be disposed of in domestic rubbish. You are
required to dispose of old electrical and electronic
appliances like this separately.
Please visit www.recycle-more.co.uk or www.
recyclenow.co.uk
for access to information about the recycling of
electrical items.
Please visit www.weeeireland.ie for access to
information about the recycling of electrical items
purchased in Ireland.
The WEEE directive, introduced in August 2006,
states that all electrical items must be recycled,
rather than taken to landfill.
Please arrange to take this appliance to your
local Civic Amenity site for recycling, once it has
reached the end of its life.