7
www.warmlite.co
USING YOUR APPLIANCE
1. Site the heater on a flat, stable surface,
away from combustible materials e.g.
curtains, furnishings etc.
2. Unwind the power cord and plug the heater
into a mains outlet and switch on.
3. Turn the power switch to select the required
heating element option. The heater is fitted
with two 400W heating elements
4. When you are finished using the heater
switch off all elements.
5. Allow the heater to fully cool and unplug
from the mains supply before carrying or
cleaning.
TILT SWITCH:
•
The heater is equipped with a safety tilt
switch.
•
This will switch the heater off if it becomes
tipped over.
CLEANING AND MAINTENANCE
•
Be sure to switch off power supply at the
wall socket and disconnect the plug before
commencing cleaning.
•
Wait for the heater to cool down fully before
commencing cleaning.
•
Clean the grilles from dust.
•
ONLY clean the body of the heater with a
damp cloth.
•
DO NOT ALLOW water into the appliance.
•
Never use soap or chemicals which may
damage the housing of the heater.
•
Allow sufficient drying time before operating
again.
•
When the unit is not in use we recommend
that the heater is re-packed in its original
packaging and stored in a cool, dry place.
WARNING:
DO NOT IMMERSE ANY PART OF THE
APPLIANCE IN WATER
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown here
may not be disposed of in domestic rubbish.
You are required to dispose of old electrical
and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or
www.recyclenow.co.uk
for access to information about the recycling
of electrical items.
Please visit www.weeeireland.ie for access to
information about the recycling of electrical
items purchased in Ireland.
The WEEE directive, introduced in August
2006, states that all electrical items must be
recycled, rather than taken to landfill.
Please arrange to take this appliance to your
local Civic Amenity site for recycling, once it
has reached the end of its life.
