SAFETY CUTOUT DEVICES
ASSEMBLY
Assemble the body frame and the base plate together as the following sequences
Remove the butterfly nuts from the lower part of the body frame.
Insert the power cord through the slot placed in the middle part of the basement and
then assemble the body frame to the base plate.
Secure the body frame to the base plate by means of the two butterfly nuts previously
removed. Insert the power cord through the suitable slots and then fix it by the clamp.
This appliance is provided with safety devices disconnects the appliance when the
radiator is tilted or when is tipped by means of a switch situated in the lower part
of the radiator.
The appliance needs only an regular external cleaning.
Unplug the appliance after use and before cleaning always and wait till the item is
completely cool.
Clean the dust from the grilles.
Do not clean the painted parts with abrasives or solvents and use only a moistened
damp cloth.
CLEANING
Class 1 Configuration
The wires in the mains lead are coloured in accordance with the following code:
GREEN/YELLOW: EARTH (E)
BLUE: NEUTRAL (N)
BROWN: LIVE (L)
Class 1 Configuration
As the colours of the wires in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN & YELLOW (or coloured GREEN) must be con-
nected to the terminal in the plug which is marked with the letter “E” or by the earth
symbol.
The wire which is coloured BLUE (or coloured BLACK) must be connected to the
NEUTRAL terminal which is marked with the letter “N”.
The wire which is coloured BROWN (or coloured RED) must be connected to the
LIVE terminal which is marked with the letter “L”.
Always ensure that the Mains Cord is fixed into the plug through the Cord Guard
or Cable Clamp, (plug wiring diagram above), and that the Cord Guard screws are
tightened to clamp the cord (outer sheath and inner coloured wires) into position in
the plug.
Make sure that the plug top is also fitted securely.
This appliance must be protected by a 13 Amp fuse in a 13 Amp type (BS1363) plug.
Should you need to replace the fuse, use only a 13Amp ASTA approved BS1362 fuse
(13A).
OPERATIONAL GUIDELINES
It is important to ensure the correct Plug Adaptor is used when operating in a country
not using the UK 13 Amp socket system. If in doubt, consult a qualified electrician.
ELECTRICAL SAFETY
4
3
