Warmlite WL41008, Руководство по безопасности и инструкция, Страница: 8 / 12

8 CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
INSTALLING THE FEET
To install the feet, attach each one to the
assembly holes and push it down firmly until it
locks in place (see picture 1).
Secure each foot by tightening the
corresponding screw, (see picture 2).
To remove the feet from the unit, untighten
the screw and firmly pull each foot from the
assembly holes.
USING YOUR APPLIANCE
Turning the Appliance ON and OFF:
To turn the appliance on, first plug it into a
mains outlet. An LED indicator will light up to
indicate the unit is on.
Once the appliance has been plugged in, use
the heat selection dial to choose your preferred
heat setting. The available heat settings are as
follows:
0 – OFF
I –
1200W
II – 2000W
II W/Fan – 2000W with Turbo Fan
Once you have selected your preferred heat
setting, rotate the adjustable thermostat dial
to the right to increase the unit’s output power
and begin the heating process.
NOTE: You can change your settings at any
time by rotating the corresponding dials.
CLEANING AND CARE
Cleaning the Unit:
•
WARNING! Allow the product to
completely cool before handling or
cleaning it.
• Clean the surface of the unit with a soft
damp cloth. Never use detergents, excess
water, treated cloths, harsh cleaning
agents or sprays, as these could cause
damage to the surface.
• Alternately, clean the unit with a vacuum
cleaner by lightly running a nozzle over
the guards on low power, to remove any
dust or dirt which may have accumulated
inside.
• CAUTION! Do not allow water or other
liquids to run into the interior of the
product, as this could create a fire and/or
electrical hazard.
Storing the Appliance:
• When not in use, store the appliance in
a cool, dry place, preferably inside its
original packaging.