Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
All Dimension are in mm………….Copyright ©
8
18 May 2015
IMPORTANT NOTES
Construction
The fires are constructed from 4-5mm and 3.2mm steel plate.
Finish
High temperature steel parts are finished with a matt black high temperature paint designed to withstand the rigors of
normal combustion (see above).
Flue System
The installation and construction of the flue system must comply with ASNZS:2918.
The
Warmington
open fires require a
Warmington
tested and approved flue system as tested to ASNZS:2918. The
tested flue system should not be modified in any way without written approval of the manufacturer. Any additional flue
components must comply with ASNZS:2918.
Floor Protection
Floor protectors are normally designed to suit each individual ‘setting’. The installation and construction of the floor pro-
tector must comply with ASNZS:2918. The
Warmington
fire requires an ‘insulating hearth’ and an ‘insulating plinth’ (floor
protector), as outlined in the specifications.
Wetbacks
On special order a wetback connection can be fitted. The wetback sits along the back of the firebox. The inlet and outlet
are to the side of the fireplace and require standard 25mm pipe connections to the threaded brass pipe of the wetback.
Inlet and outlet pipes are at different heights, permitting flow of water in one direction and need to be correctly connected
by the Plumber. (see our Wetback Specifications).
Installation
The
Warmington
unit is to be installed by an approved NZHHA Installation Technician.
Stove Bright temperature paint has been air dried creating a quality coating. To optimize the performance of the coating,
and to maximize its durability, it needs to go through a heating process. Once this initial firing process is successfully
completed, the coating will bond to the metal with a colourfast finish that will last for years. For general information from
the paint manufacturer regarding paint curing,
please visit:
http://forrestpaint.com/index.php?page=stove-bright-User-guide
Follow these instructions from Stovebright BEFORE using the fire for the first time:
Ventilate:
Open windows and doors in the room. To speed dissipation of odour from the initial firing process,
you can place a fan in the room to move the air.
Vacate:
The fumes from the initial heating process are non-toxic, but may be uncomfortable for babies, small
children, pregnant women, elderly, pets, or anyone with breathing difficulties.
Don’t touch the surface. The paint will be soft during the first light.
Set the paint slowly with successive burns.
For detailed information regarding burn temperatures please refer to the above web address for forrestpaint.
GENERAL INFORMATION REGARDING PAINT
