SRM200 User's Manual
Part No.: 7100.SRM200
Page 4 / 8
V0521
LCD display overview
n
Measuring Surface Resistance
·
To measure the surface resistance of an object, hold the instrument onto the surface and press the
"PUSH TO TEST" button.
·
The value is indicated on the display. The coloured LED's additionally indicate the measuring range if
no limit is assigned. If the limit is assigned, the limit arrows on the display will indicate the measured
value being below or above the limit range.
·
▼▲
selects the storage folder;
OK
stores the current measurement value to the selected folder.
n
Measuring Resistance to Ground
·
Plug in the supplied grounding cord at one socket of the instrument. The associated internal electrode
will be disconnected.
·
Connect the opposite end of the grounding cord to "ground" or a "groundable point".
·
Hold the instrument onto the surface like described above and press the button.
Measured value
Relative humidity
Battery status
Date
Temperature
(
V
) View result mode active
(
D
) Delete mode active
Value exceeds
selected limit
Value is below
selected limit
Assigned limit
Time
Storage folder
PUSH TO TEST
PUSH TO TEST
