Warm Tech WTRCM2000TL, Оригинальное руководство пользователя

Страница: 23 / 29

23
4) THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2. To adjust temperature,press the “ ” to set the desired temperature and the temperature
set from 10
℃
to 49
℃
.
3. When the air temperature drops 2 degree below the set temperature,the heater will start
heating with ”I/W”(1000W).
4. When the air temperature drops 4 degree below the set temperature ,the heater will start
heating with”II/H”(2000W).
5. When the air temperature high 1 degree or
≤
the set temperature,the heater will blow the cold
air .
5) Week Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2.
WEEK
Press “ ”button 1st time,” ” lights on,show “1”means “Monday”.
HOUR Press “ ” button 2nd times,” ” lights on, “ two buttons set the Hours from
01--00(01=1 o’clock,02=2 o’clock...00=24 o’clock ect.)
MINUTE Press “ ” button 3rd times ,” ” lights on, “ two buttons set the Minutes
from 00--59(01=1 Minute,02=2 Minute ect.)
---------------------------------------------------------
This is open time
HOUR Press “ ” button 4th times,” ” lights on, “ two buttons set the Hours from
01--00(01=1 o’clock,02=2 o’clock...00=24 o’clock ect.)
MINUTE
Press “ ” button 5th times ,” ” lights on, “ two buttons set the Minutes
from 00--59(01=1 Minute,02=2 Minute ect.)
--------------------------------------------------------- This is close time
The above are finised set Monday Timer.
3.Press “ ” button once more,” ” lights on,show “2”means “Tuesday”.Pls noted that the
operate with open time HOUR/MINUTE and close time HOUR/MINUTE are all same as before
Monday.
4.From 1-7(1=Monday,2=Tuesday...7=Sunday ect.) are all set finised,press “ ” button on
remote control 7
th
times to set from Monday to Sunday’s temperature and press“ two
buttons,select the temperature which you need,the temperature range from 10
℃
to 49
℃
.
PS: In Week timer function,when you set today’s temperature,the thermostat function will start,the
rules same as 4) THERMOSTAT INSTRUCTIONS,pls noted.
You can set different open time ,closed time and temperature within whole week.
6) Window Open Function
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2.Press “ ” button, the “ ” light is on.The appliance is working as smart saving energy
models.(In this function,the appliance is check and record environment temperature in
immediately.It will stop working,when the appliance check the environment are drop
≧
3
℃
.The
user should restart the appliance with “ON/OFF” button)