Warm Tech WTFH2000, Оригинальное руководство пользователя

Страница: 14 / 24

14
13. Do not use the fan heater in the
rooms with flammable liquids or gases or
while using inflammable solvents,
varnish or glue.
14. If the cord of this appliance is
damaged, discontinue use of this
product and contact you’re your nearest
authorised service agent.
15. keep the fan heater clean. Do not
allow any objects to enter any ventilation
or exhaust opening as this may cause
electric shock, or fire damage to the
heater.
INSTALLATION
The Appliance requiers no installation, it
should be used solely as a portable
aplliance. Portable appliances are not
suitable for use in a bathroom.
OPERATION
- Turn the thermostat knob (right) in a
clockwise direction until it reaches the
desired setting.
- Summer service (ventilation only) :
turn the knob to setting < >
- Heating at reduced power : turn the
knob (right) to setting I (1000W).
- Heating at full power : turn the (right)
to setting II (2000W).
- Switching off : turn the knob (left) to
setting 0..
RGULATING THE THEMOSTAT
When the room has reached the required
temperature turn the thermostat knob in
an anti-clockwise direction up to the
point where the appliance switches off
and not beyond. The temperature fixed
in this way will be automatically
regulated and kept at a constant level by
the thermostat.
CLEANING AND MAINTENANCE
Before cleaning always remove the plug
from the electrical socket.
Clean the air inlet/outlet grilles
frequently.
Never use abrasive powders or solvents
or liquids.
Use a damp lint-free cloth.
WARNINGS
- Do not use the appliance in the vicinity
of showers, bath tubs, wash basins,
swimming pools, etc.
- Always use the heater in an upright
position.
- Do not use the heater to dry your
laundry. Never obstruct the intake and
outlet grilles (danger of overheating).
- The heater must be positioned at least
100cm from furniture or other objects.
- When the appliance is used in portable
version, do not place it up against walls,
furniture, curtains, etc.
- The appliance must be installed so that
the switches and other controls can not
be reached by persons using the bath
tub or the shower.
- This appliance comes with a Y-type
connection. Replacement of the feed
cable must be entrusted to a technician
only, because such work requires special
tools.
- The appliance must not be positioned
directly underneath a fixed power point.
- Do not use the appliance while it is
cooling down, in order to avoid
overheating with the attendant risk of
fire.
- Do not use the appliance in rooms less
than 4m² area.
The heater is fitted with a safety device
which will switch off the heater in case of
accidental overheating (eg. Obstruction