22
INSTRUCTIONS FOR USE
1.
Turn the heater ON by pressing remote control the ON/OFF button ,the unit will blow the
cold air and “
” light is on.
2.
Pressing the “MODE” button on remote control ,the unit will blow the warm air and
both“ ”and“
” lights are on.
Pressing the “MODE” button second times on remote control,the unit will blow the hot air and
both “
”“
” lights are on.
3.
Pressing the “MODE” button Three times on remote control,the unit will blow the cold air
and “Fan/M” light is on.
4.
Pressing the “
“ button on the remote control ,the unit will Louver swing up and
down.Pressing again will be closed swing function.
PS:For smart operate,customer only press the one start button near about master
button,the heater will working with hot air and both “
”“
”“
”lights are on.
Smart button view:
2) 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function through by
Remote control “
”
button .
2.
Press “
” button ,set the timer up to 24 hours,keep press “
” button to increase the hours
from 00:00--24:00(01:00=1hour,...24:=24:00 hours ect.) and the “
” light is on.
PS:
set as “00” means no set timer ,the “
” light is off.
3)THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function only through
by Remote control.
2.
To adjust temperature, press the “
” to set the desired temperature and the temperature
set from 10
℃
to 49
℃
.
3. When the air temperature drops 2 degree below the set temperature, the heater will start
heating with ”
”(2000W).
4. When the air temperature high 1 degree or
≤
the set temperature, the heater will blow the cold
air.
Master Button
One start Button
