21
OPERATION INSTRUCTIONS
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in your
area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on the wall ,setting the master button to “-”position.plug the cord set into a
AC220-240V~ electrical outlet,with “BEE” sounds the “Power”light is on with RED color and the
heater will shows the default temperature ,it will twinkle 3 seconds.
1)General Using OPERATION
1.
Turn the heater ON by pressing “
”
button ,the unit will blow the cold air and “
” light
is on.
2.
Pressing the “MODE” button on remote control ,the unit will blow the warm air and
both“ ”and“
” lights are on.
Pressing the “MODE” button second times on remote control,the unit will blow the hot air and
both “
”“
” lights are on.
3.
Pressing the “MODE” button Three times on remote control,the unit will blow the cold air
and “Fan/M” light is on.
2) 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).This function
through by Remote control “
”
button .
2.
Press “
” button ,set the timer up to 24 hours,keep press “
” button to increase the hours
from
00:00--24:00(01:00=1hour,...24:=24:00 hours ect.) and the “
” light is on.
PS:
set as “00” means no set timer ,the “ ” light is off.
3)THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan,warm,hot are all ok).This function
only through by Remote control.
2.
To adjust temperature, press the “
” to set the desired temperature and the
temperature set from 10
℃
to 49
℃
.
3. When the air temperature drops 2 degree below the set temperature, the heater
will start heating with ”
”(2000W).
4. When the air temperature high 1 degree or
≤
the set temperature, the heater will
blow the cold air.
4)Weekly Timer FUNCTION
1.
Open the appliance as working conditions,(fan,warm,hot are all ok).This function
only through by Remote control.
2. Before turn on the heater,set the time as real time.
WEEK
Press “Set” button ,“1”light twinkle ,press “
two buttons set the week
from 1--7 (1=Monday...7=Sunday ect.)
HOUR
Press “Set” button again,LED display front “00” twinkle, press“
two
buttons set the Hours from 01--00(01=1 o’clock,02=2 o’clock...00=24 o’clock ect.)
