22
OPERATION INSTRUCTIONS
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in your
area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on the wall ,setting the master button to “-”position.plug the cord set into a
AC220-240V~ electrical outlet,with “BEE” sounds the “Power”light is on with RED color and
the heater will shows the default temperature ,it will twinkle 3 seconds.
1) HEATING PERPARE
Set time
Before turn on the heater,set the time as right time.Press remote control “
”
button,light on
control panel,it shows
current Room temperature.
WEEK
Press “Set” button one time,”I/W”
lights on,press “
two buttons set the week from 1--7
(1=Monday,2=Tuesday...7=Sunday ect.)
HOUR
Press “Set” button again,”II/H” lights on,
“
two buttons set the Hours
from 01--00(01=1 o’clock,02=2 o’clock...00=24 o’clock ect.)
MINUTE
Press “Set” button again,”Fan/M” lights on,
“
two buttons set the
Minutes from 00--59(01=1 Minute,02=2 Minute ect.)
PS
:Press “Set” button,screen shows number will
twinkle 5 seconds,you should operate in
time ,otherwise appliance will get back to standby.
(Appliance will keep the right time until power off)
2) General Using OPERATION
10.
Turn the heater ON by pressing the ON/OFF main button ,the unit will blow the cold air
and “Fan/M” light is on.
11.
Pressing the “MODE” button ,the unit will blow the warm air and both“I/W”“Fan/M” lights
are on.
12.
Pressing the “MODE” button second times,the unit will blow the hot air and both
“I/W”“Fan/M” lights are on.
13.
Pressing the “MODE” button Three times,the unit will blow the cold air and “Fan/M” light is
on.
PS
:Control panel and remote control are same operate way.
3) 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).Control panel “TIMER”
button and remote control “
”
button are same operate way.
2.
Press “TIMER” button ,set the timer up to 24 hours,keep press “TIMER” button to increase the
hours from 00--24(00= close,01=1hour,02=2 hours...24=24 hours ect.) and the “TIMER” light is
on.
PS:
set as “00” means no set timer ,the “TIMER” light is off.