Warm Tech WTCAC50R, Оригинальное руководство пользователя

Страница: 45 / 61

45
4. ASSEMBLING INSTRUCTIONS
A
．
Hot air outlet
B. upper shell
C.rear handle
D. front handle
E.cord wrap
F.lower shell
G.fuel gauge
H.fuel cap
I
．
wheel
J. Side cover
K.digital temperature display
L.thermostat knob
M.Power switch
N.lower tube frame
O. Fuel tank
P.power cord
Q.Pressure gauge
R.Pressure gauge
Assembling wheels and tube frame
1
、
insert the wheel axle to the corresponding hole of lower
tube frame
，
set bushing G at the two ends
，
slide the
wheel F over the wheel axle H
，
put on wheel cap E
。
2
、
Put the heater body on the lower tube frame B, make sure
the 4 holes of handle frame point towards the
corresponding 4 holes on the lower tube frame
respectively.
3
、
Insert screws J in the holes
，
place flat washers D under
the lower frame B and tighten the hexangular screw C
。
4
、
Insert other screws in the holes respectively and use a
screw driver to tighten them by the same way.