Warm Tech WTCAC30R-DU, Оригинальное руководство пользователя

Страница: 49 / 68

49
Ignition
：
insert the plug in the socket
，
put the power switch to position“1”, the indicator lights up, It
would ignite automatically when the setting temperature is higher than ambient temperature in LED
digital temperature display.
If heater does not start, turn power switch to “0” and then to “1” position. if the heater still does not start
after three times please contact your dealer.
Attention
：
while the heater is operating, never let the floor ground overheats to prevent causing fire.
◆
Flameout
Pay attention
1
、
when you shut off the heater, make sure the flame is out before you left the appliance.
2
、
Put the power switch to position“0” waitting fan stop working and the indicator extinguishes, then
remove the plug from the socket.
◆
safety device
Flame-out protection
：
Utilizes a photocell to monitor the flame in burn chamber during normal
operation.The photosensitive resistor will become infinite big , cut off Electrovalve Assy ,will stop offer
oil automatic , the fan will working 90s then cut off the power .
Electrical power breakdown protection
：
when the power breaks down the heater stops working
without the plug being removed from the socket . When the power is recovered, the indicator will light
but the heater will not work. Please press the power switch to start up the heater.