14
Do not use the heater if the power
cord is damaged.
If the power cord is damaged it
must be replaced
by a recognized service agent or
other qualified person.
If the plug is damaged, see Plug
Replacement details below.
3
OPERATION OF THE HEATER
NOTE:
It is normal when the heaters are
turned on for the first time or when they
are turned on after having not been used
for a long period of time the heaters may
emit some smell and fumes.
This will disappear when the heater has
been on a short while.
Convector heater with thermostat
“TCPM2000THERMO”
a. Choose a suitable location for the
heater, taking into account the
safety instructions above.
b. Insert the plug of the heater into a
suitable socket.
c. Turn the thermostat knob fully in a
clockwise direction to the maximum
setting.
d. Turn on the heating elements by
means of the rocker switches on
the side panel.
e. When the heating elements are on
the switches will illuminate.
f. For maximum heat output both
switches should be on.
g. When the desired room
temperature has been reached, the
thermostat knob should be turned
slowly anti-clockwise until the
thermostat is heard to click off and
the lights on the element switches
are seen to go out.
h. After this the heater will keep the
air temperature in the room at the
set temperature by switching on
and off automatically.
i.
In it’s minimum (fully anti-
clockwise) position, the thermostat
provides a frost guard position.
j. In this position (depending on the
size of the room) the heater will
maintain the temperature above
freezing.
Convector heater with thermostat and
fan
“TCPM2000TV”
All the above instructions for model
“TCPM2000THERMO” (above) also apply
to model
“TCPM2000TV”
.
Model
“
TCPM2000TV”
also incorporates
an internal fan, which can be switched on
independently of the heating elements.
Fan Operation:
-
This is operated by means
of the switch with the fan
symbol along side it.
-
he fan will only operate
with the thermostat in the
“on” position and can be
used when the heating
elements are
“on” to blow
warm air into the room.
-
In warm conditions the fan
can be used with the
heating
elements “off” to
blow cool air into the room.
Convector heater with thermostat and
timer “TCPM2000TIM”
All the above instructions for model
“TCPM2000THERMO” (above) also apply
to model
“TCPM2000TIM”.
This model is also fitted with a 24hr timer
which has 96 segments around its
circumference, each segment being
equivalent to 15 minutes of time.
With the aid of this timer it is possible to
preset the time and duration of the
period(s) that it is desired the heater will
operate, in any 24hr period.
Timer Operation
-
The centre of the timer has
a 3 position slide switch.
-
In the central position
(denoted by the clock
symbol) the timer will
switch the heater on and
off at times set by the
