22
OPERATION INSTRUCTIONS
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in your
area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on the wall ,setting the master button to “-”position.plug the cord set into a
AC220-240V~ electrical outlet,with “BEE” sounds the “Power”light is on with RED color and
the heater will shows the default temperature ,it will twinkle 3 seconds.
1) HEATING PERPARE
Set time
Before turn on the heater,set the time as right time.Press remote control “
” button,light on
control panel,it shows current Room temperature.
WEEK
Press “Set” button one time,”
” lights
on,press “
two buttons set the week from 1--7 (1=Monday,2=Tuesday...7=Sunday ect.)
HOUR
Press “Set” button again,”
” lights on, press “
two buttons set the Hours from 01-
-00(01=1 o’clock,02=2 o’clock...00=24 o’clock ect.)
MINUTE
Press “Set” button again,”
” lights on,press “
two buttons set the Minutes from
00--59(01=1 Minute,02=2 Minute ect.)
PS
:Press “Set” button,screen shows number will twinkle 5 seconds,you should operate in
time ,otherwise appliance will get back to standby.
(Appliance will keep the right time until power off)
2) General Using OPERATION
9.
Turn the heater ON by pressing the ON/OFF main button ,the unit will blow the cold air
and “
” light is on with Blue color.
10.
Pressing the “MODE” button 1
st
time ,the unit will blow the warm air and “
” lights on
with Red color.
11.
Pressing the “MODE” button 2
nd
times,the unit will blow the hot air and “
” lights on with
Blue color.
12.
Pressing the “MODE” button 3
rd
times,the unit will blow the cold air and “
” light is on
with Blue color.
PS
:On control panel “
” button, press 1
st
time is COOL AIR; 2
nd
times is WARM AIR; 3
rd
times
is HOT AIR; 4
th
timers is SWING FUNCTION; 5
th
times is OFF,pls noted it.
3) 24H Timer FUNCTION
1.Open the appliance as working conditions,(fan,warm,hot are all ok).Control panel “
” button
and remote control “
” button are same operate way.
2.
Press “
” button ,set the timer up to 24 hours,keep press “
” button to increase the
hours from 00--24(00= close,01=1hour,02=2 hours...24=24 hours ect.) and the “
” light is on.
PS:
set as “00” means no set timer ,the “
” light is off.
