Warm Audio WA-MBA, Быстрый старт

Страница: 2 / 40

2
GETTING STARTED
The MBA is intended to be mounted on a desktop or similar flat
surface, using the removable C-clamp assembly at the base of
the boom arm.
1. Begin by removing the C-clamp from the base of the
WA‑MBA , and then open the clamp enough to accommodate
the depth of your desktop by unscrewing the clamping bolt. The
clamp is seated properly when both of its surfaces are making
solid contact with the flat surfaces on the top and underside of
the desk (see Image A).
2. Tighten the bolt until the clamp assembly is secure and won’t
move unintentionally.
3. Lower the
WA‑MBA
boom arm assembly and fit it into the
clamp on the desktop - it should move easily and freely once
they are properly connected together.
Image A