WARNING: any other servicing should be performed by an authorized service representative.
Error Code List:
– If LED-display shows the error code, please reference to the solution as following.
Error Code
Cause and Solution
E1
Voltage is under 75V
E2
Voltage is over 145V
E3
IGBT in short circuit. The accessory and spare parts are damaged,
please contact the nearest authorized service facility for trouble
shooting, repair and adjustment.
E5
The temperature sensor underneath the cooking area is defective or
there is a short circuit. The accessory and spare parts are damaged,
please contact the nearest authorized service facility for trouble
shooting, repair and adjustment.
E6
The appliance is too hot. The cooking temperature is over 450
.
℉
Please unplug the plug, after the unit has been cooled down, plug the
plug into socket, the unit would be start again.
E7
The temperature of IGBT is over heat . After the unit has been cooled
down, the unit would be automatic switches to standby mode. If it can
not work, the accessory and spare parts are damaged, please contact
the nearest authorized service facility for trouble shooting, repair and
adjustment..
E9
Temperature sensor is defective. Issue is cased by a concave pot.
Change pot and restart the induction. If there is no issue with the pot,
restart the unit. If the error code still shows, please contact the
nearest authorized service facility for trouble shooting, repair and
adjustment.
©2013 Waring Commercial
314 Ella T. Grasso Ave
Torrington, CT 06790
www.waringcommercialproducts.com
