14
Power Supply Cord – The power supply cord should not be
replaced by the end user. The power supply cord should be
replaced only by the manufacturer’s authorized importer
(or, in the United States and Canada, by an authorized
service center).
NOTE:
All parts require constant monitoring for conditions
requiring replacement. For assistance, contact your nearest
service center.
CLEANING AND SANITIZING INSTRUCTIONS
THE CONTAINER MUST BE CLEANED AND DRIED
AFTER EACH USE OF THE BLENDER ACCORDING TO
THE FOLLOWING INSTRUCTIONS.
FAILURE TO DO SO MAY ALLOW RESIDUE OF
PROCESSED MATERIAL TO COLLECT ON THE INTERNAL
SEALS OF THE BLADE ASSEMBLY, RENDERING THEM
INEFFECTIVE.
• Wash, rinse, sanitize and dry container prior to initial
use and whenever it will not be used again within a period
of 1 hour.
• Wash and rinse container after each use.
• Clean and sanitize motor base prior to initial use and
after each use.
• Washing solutions based on non-sudsing detergents and
chlorine-based sanitizing solutions having a minimum
chlorine concentration of 100 PPM are recommended.
The following washing, rinsing, and sanitizing solutions,
or their equivalents, may be used.
