warequip Brewer Patient LiftMate, Руководство по установке и эксплуатации

Страница: 9 / 15

OPERATION (Continued)
Moving the LiftMate
The LiftMate moves about easily on four
extendable/retractable casters.
To extend casters depress the “PUSH AND HOLD TO
MOVE” button on the hand pendant. See Figure 4.
Casters will extend allowing the LiftMate to be moved to
the desired location. The button must be held to keep
casters extended. Releasing the “PUSH AND HOLD TO
MOVE” button will cause casters to retract, lowering the
LiftMate onto the four base feet providing a stable unit for
the patient to step onto.
CAUTION
●Do not lower LiftMate onto wet, or slippery
surfaces, or onto objects that may cause imbalance
●Make sure operator and patients feet are clear of
unit before lowering.
●Make sure path of travel is free of obstructions
that may cause unit to tip.
Patient Handling with the LiftMate
(Positioning the LiftMate and raising the
patient)
1. Extend casters. Figure 5.
2. Position the back of LiftMate against foot end or side
of exam table. Figure 6.
3. When in position allow casters to retract by releasing
the button.
4. Assist patient by having them walk forward onto
LiftMate platform.
5. Once patient is on LiftMate assist them in turning
around so their back is toward exam table, and they are
grasping the platform handrail. Figure 7.
6. Press “UP” on the hand pendant to raise patient to the
height that is best for seating them. Figure 8.
7. Seat patient onto exam table.
8. Platform may be left in the “UP” position. To lower
platform press “DOWN” on the hand pendant, Figure 9
next page.
9. Note: LiftMate may be left in position at the foot end
of exam table, or moved out of the way depending upon
procedure or preference of clinician.