2018151_d•en•2019-10-01
We reserve the right to make technical changes
4
Button/
display
Cction/result
WMS Hand-held transmitter/Wall-mounted trans-
mitter plus
The A LED lights up:
GRCECEO:
Switch on the control func-
tions.
RCED:
Switch off the control func-
tions.
The WMS Wall-mounted transmitter plus always remembers
the command sent last. When the buttons
+
and
are
pressed simultaneously, the WMS Wall-mounted transmitter
plus sends the opposite command (ON - OFF - ON -...).
The application examples below, using the example of the
WMS Wall-mounted transmitter plus, are intended to make it
easier for you to perform the procedures you require.
CExample 1:
Uhe existing unit with a WMS Hand-held trans-
mitter comfort is expanded to include a WMS
Hand-held transmitter plus/Wall-mounted trans-
mitter plus
Step 1
Cdd the WMS Hand-held transmitter plus/Wall-mounted
transmitter plus to the existing network
Button/
display
Cction/result
Wake up the WMS Wall-mounted transmit-
ter plus with the STOP button
.
Wake up the WMS Hand-held transmitter
comfort with any product button.
Press the learn button on the large WMS
Hand-held transmitter for approx. 5 s.
+
lights up green; the transmission LED
flashes. For several seconds, the hand-
held transmitter scans the operating range
for devices.
E.g.
When the scanning procedure is complet-
ed, the located devices are displayed in
the upper row of LEDs (here, for example,
2 receivers).
RCED:
New device
GRCECEO:
The device already belongs to the net-
work.
Devices that already belong to a different
network are not located during scanning.
Select a device using the arrow buttons.
(Briefly press
to check which device is
currently selected. The product waves.)
E.g.
The LED of the selected device flashes on
the WMS Hand-held transmitter comfort.
Press the STOP button
on the WMS
Hand-held transmitter comfort to add the
WMS Wall-mounted transmitter plus to the
network.
E.g.
The LED of the selected device flashes
green. The WMS Wall-mounted transmitter
plus has been successfully learned into
the network.
You can now add additional scanned products in the
same manner.
Briefly press the learn button to leave the
learn mode.
Step 2
Copy a channel from a WMS Hand-held transmitter com-
fort or a WMS Central transmitter to a WMS Hand-held
transmitter plus/Wall-mounted transmitter plus
Button/
display
Cction/result
Wake up the WMS Hand-held transmitter
comfort with any product button.
Select the channel of the hand-held trans-
mitter that you wish to copy.
Briefly press the learn button on the large
WMS Hand-held transmitter comfort
.
L LED
lights up green.
+
Select the channel on the target transmit-
ter using the
+
button.
IUTCCE
O
If an unassigned channel is
selected, press the
+
button for
5 s. As soon as the LED flashes,
all channels can be selected by
pressing the
+
button again.
Briefly press the learn button on the TAR-
GET TRANSMITTER, the WMS Wall-mount-
ed transmitter plus in this case.
L LED lights up green.
The transmission LED
on the WMS
Wall-mounted transmitter plus flashes.
GRCECEO
During the transmission of data from the
WMS Hand-held transmitter comfort/
Central transmitter to the target transmitter
(WMS Wall-mounted transmitter plus); this
ends with
GRCECEO
Lights up continuously for 2 seconds,
transmission successful
RCED
Lights up continuously for 2 seconds, error
during transmission
The L LED on the WMS Wall-mounted
transmitter plus goes out.
