WAREMA Wisotronic Скачать руководство пользователя страница 8

Страница: 8 / 112

890557_d•en•01.07.2014

We reserve the right to carry out improvements

Wisotronic 1-channel

Operating instructions

2 Safety instructions

We have developed and tested the Wisotronic in compliance with the basic

safety requirements.

Nonetheless, some risks remain.

For this reason, please read these instructions before commissioning and

operating the control.

It is very important to adhere to the safety information listed here and the

warning information in these instructions. Otherwise, any warranty claims

against the manufacturer become void.

Keep these instructions for future use.

2.1 Meanings of symbols

and pictographs

The safety information in these instructions is marked with warning symbols.

It is categorised into different warning types depending on the level of poten-

tial danger:

DANGE

warns of an

imminently dangerous situation.

Possible consequences

may include serious injuries and even death

(personal injury), property or environmental

damage.

WDEAIAN

warns of a

potentially dangerous situation.

Possible consequences

may include light or serious injuries and even

death (personal injury), property or environmental

damage.

CDAUIOA

Reminder to be careful

. Possible consequences of the failure to do so may

include

property damage

The following pictograms and symbols may be affixed to the control unit itself

or to the connected devices, alerting you to potential danger:

WDEAIAN

Warning against dangerous electrical voltage.

NOTE

The term

NOTE

marks important

notes

and helpful

tips

Example

The term

Example

marks an

example

The

square

marks an

instruction

or a

prompt for action

. Perform this step.

The

triangle

marks an

event

or the

result

of a preceding action.

The

black triangle

is a

bullet point

for lists or selections.

Safety instructions

Содержание Wisotronic

















































































































Результаты поиска

Содержание Wisotronic

Отзывы:

Похожие инструкции для Wisotronic

Бренды по названию

Популярные бренды

WAREMA Wisotronic, Руководство по эксплуатации

Результаты поиска

Содержание Wisotronic

Отзывы:

Похожие инструкции для Wisotronic

Бренды по названию

Популярные бренды