warema_890558_alhb_en_v5•2022-02-01
We reserve the right to carry out improvements
72
Wisotronic 1-channel
Installation instructions
Product matrix
The following overview shows the local operation modes that can be used for
each product type. The combinations marked with an
x
can be parameter-
ised but are not recommended or useful.
The table applies to local single operation or local group operation.
Product type
N
o manual oper
ation
Dead man
P
er
manent mode
R
adio time mode
Articulated arm awning
Conservatory awning
External venetian blind
Roller shutters
Pleated blind
Venetian blind
Window
Fault alarm contact
x
x
x
Inside roller blind
Vertical awning
Facade awning
Drop-arm awning
Markisolette
= combinable,
x
= not combinable/not useful
Fig. 21
Product matrix for local manual operation
The "Stop at every button press" parameter works with every product type
except for the fault sensor contact.
8.4.12 Control line protocol
The [
CL protocol pulse duration
] and [
CL protocol pulse pause
]
menu items can be used to adapt the control line protocol.
This function is intended for future applications with special motor control
units. It is not yet supported at this time.
CAUTION
The preset values (0 ms) must not be changed as this may otherwise lead to
faults in moving the connected sun shading products.
Products
Содержание Wisotronic
Страница 1: ...Valid from 1st February 2022 warema_890558_alhb_en_v5 Installation instructions Wisotronic 1 channel...
Страница 105: ...warema_890558_alhb_en_v5 2022 02 01 We reserve the right to carry out improvements 105 Notes...
Страница 107: ...warema_890558_alhb_en_v5 2022 02 01 We reserve the right to carry out improvements 107 Notes...
Страница 108: ...WAREMA Renkhoff SE Hans Wilhelm Renkhoff Strasse 2 97828 Marktheidenfeld Main Germany http www warema de info warema de...