Operation
[B867213_0] - EN/ 25.09.09
Page 5 of 12
Subject to change without notice.
3
Operation of the ceiling roller blind
3.1
Ceiling roller blind with 230V electric drive
NOTE
The product can be stopped in any position.
NOTE
The limit stop of the product is restricted in both
directions, i.e. the product is automatically stopped
at this point.
Retracting and extending with rotary switch or push
button
Retracting and extending with snap-in switch
dd2
000
03
408
Press and hold the button
(UP) or the button (DOWN)
or
Turn the rotary switch to the
left or right and hold.
The product moves in the
selected direction. The
movement stops when the push
button or rotary switch is
released.
dd2
000
03
408
Press the button (UP) or
the button (DOWN) or
Turn the rotary switch to
the left or right.
The product moves in the
selected direction. The
movement is stopped by
pressing the stop button,
pressing the button for the
opposite direction or returning
the rotary switch.
Extending/retracting with automatic control
Information for motor runtime
Instructions on how to operate this feature are contained in a
separate manual.
A wide range of control devices is available for our
sun
protection systems
to give you optimum control of the
product. Please contact your qualified specialist for further
information.
CAUTION
Product damage!
Set the automatic control to manual if you
are going to be away.
The motors used in these products are not intended for
continuous operation. The integrated thermal protection will
switch the motor off after approx. 4 minutes. The product will
be ready for use again after approx. 10-15 minutes.
