background image

Maintenance

WAREMA Renkhoff SE - Hans-Wilhelm-Renkhoff-Straße 2 - 97828 Marktheidenfeld - Germany

www.warema.com - [email protected]

6

Maintenance

Proper and regular cleaning and the use of original spare
parts only are essential for fault-free operation and a long
service life.

CAUTION

Risk of injury from falling from climbing aid!

Climbing aids may tip over if they are improperly
erected.

Position climbing aids on level and firm ground.
Do not rest climbing aids against the product.

6.1

Cleaning

To ensure the longest possible life, we recommend
that you clean the surface of the product regularly or
at least once a year.

If the first cleaning takes place several years after
initial installation, the product or fabric cannot be
restored to its original condition.

Replacement claims cannot be honoured on the
grounds of these cleaning instructions because the
effectiveness of these measures depends on a large
number of factors that vary from case to case.

Always follow the manufacturer instructions when
using chemical cleaning products. In the interest of
the environment, it is recommended that you only
use 100% biologically degradable cleaning products.

NOTICE

Product damage from incorrect cleaning!

Incorrect cleaning procedures may result in damage
to the product or product parts, and the surfaces and
structures may be permanently altered.

Do not use abrasive cleansers or sponges and

solvents such as alcohol or naphtha.

Remove dust from the surfaces using a soft

brush or feather duster.

Clean the surfaces with a suitable cleaning

agent.

6.2

Warranty

Subject to the statutory period of limitation for warranty
claims. This requires regular maintenance. The warranty
does not include wear parts or optical changes in line

with the type of material used (e. g. bleaching of surfaces
caused by UV rays).

6.3

Spare parts/repairs

INFO

To ensure that your product will operate properly
on a continuous basis and to avoid changing
its approved status, use original spare parts
only. Contact your WAREMA specialist dealer if
necessary.

Содержание FS











Отзывы: