background image

816820_g•en•2017-12-01

We reserve the right to carry out improvements

4

Special functions

Manifold special functions are additionally possible in 

WAREMA EWFS. Should you wish further information, your 

specialist dealer will be pleased to give you the applica-

tion brochure.

The "W", "B" and "C" function buttons

Function button "A" of the transmitter can be used to 

switched off the sun control temporarily if you additionally 

use the EWFS weather station in your system. 

Temporary deactivation of the sun control:

n

  Press the "A" button of the transmitter and hold until 

the sun shading system stops moving. Release the but-

ton again. The sun control is now switched off for 12 

hours. After this period, the sun control is reactivated 

again automatically.

Wctivate the sun control again:

n

  Press and hold the "A" button of the transmitter. Re-

lease the button again when the sun shading system 

waves. The sun control is active again. If the automatic 

system was already active, nothing changes. 

The "A", "B" and "C" buttons of this transmitter have no 

function.

Installation

The receiver is designed for installation in a flush-mounted 

junction box 80 x 80 mm. Only lines used for the wiring 

of the receiver should be routed into this box. The unit is 

electrically connected according to the wiring diagram on 

the reverse. The lines are connected via spring terminals.

Electrical installation

An on-site overload current disconnecting and isolating 

switch to switch off the entire system must be provided.

Commissioning

  Films on commissioning can be found at:

 http://www.warema.de/Produkte/

 Steuerungssysteme/Funksysteme/

Complete the installation and apply the supply voltage. 

The device is operational. 

Maintenance

There are no parts within the device that require mainte-

nance.

Liability

Failure to comply with the product information in these 

instructions and use of the device in a manner that con-

travenes its intended use and purpose may result in the 

manufacture refusing to honour warranty claims for prod-

uct damage. In this case, liability for consequential harm 

to persons or damage to property will also be excluded. 

Follow also the instructions in the operating manual of 

your sun shading system. The automatic or manual opera-

tion of the sun shading system when iced over as well as 

using the sun shading system during severe weather may 

cause damage and must be prevented by the user by tak-

ing suitable precautions.

Disposal

After its use, the device must be disposed of according to 

legal regulations or returned to your local recycling centre!

Aser information

The device is approved for use in the following countries:

A, B, D, DK, E, F, FIN, GB, GR, I, IRL, L, NL, P, S, CH, IS, N.

Содержание EWFS Haustechnik FZL







Отзывы: