Assembly - Attaching the Lights
3
Install the crystal
�
A
A
WARN I NG:
Allow the shatter resistant bowl to cool completely
before removing.
CAUTION:
Make sure the power is off before attaching or
removing the shatter resistant bowl.
CAUTION:
Do not over tighten the hex nut,overtightening the
hex nut may cause the shatter resistant bowl to break.
1.Connect the chain to the fan and the light switch.(hand pull chain only)
2.Select the appropriate bulb and install it on the lamp holder.
hand pull chain only)
Operation
OPERATING YOUR FAN
Turn on the power and check the operation of the fan.The fan pull
chain controls the fan speed as follows:
1 pull-High,2 pulls-Medium,3 pulls-Low,4 pulls-off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size,ceiling height,and number of fans.
The slide switch
(XX)
controis the direction of the blades:forward
(switch down)or reverse(switch up).
�
NOTE:
Wait for the fan to shop before reversing the direction of
LJ
the blade rotation.
A. Warm werther - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a highter setting
without affecting your comfort.
B.Cool weather -(Forward) An upward airflow moves warm air off of
the ceiling.This allows you to set your heating unit on a lower setting
without affecting your comfort.
A. Warm Weather
\.._I
B.Cool Weather
lli]
