WARDRAY PREMISE MR5501P Скачать руководство пользователя страница 13

13

 

 

General Maintenance

 

 

 

It is strongly recommended that the following checks are carried out on a weekly basis by 

trained personnel, to ensure trouble free operation of the trolley. 

 

 

• 

Check the solid plastic table top for cracks or other obvious signs of damage or 

contamination. Report any damage found.

 

 

• 

Check mattress for any sign of damage or contamination. Report damage or clean where 

necessary with mild soap and water.

 

 

• 

Check cot side covers for signs of damage, splits or tears.

 

 

• 

Check castors for free movement and the braking mechanism for functionality, check and 

remove any debris that may have been caught between the forks and around the axles. 

This is a common occurrence and can lead to a shortened life expectancy of the castor if 

left unattended.

 

 

• 

Check the backrest function.

 

 

• 

Check the Trendelenburg function of the trolley.

 

 

• 

Particular attention must be made to the raise and lower function. Raise and lower the 

trolley a couple of times before using, check for any leaks, especially if the trolley has not 

been used for a long period of time.

 

 

• 

Check the cot sides for functionality and damage, especially the cot side brackets and 

plungers, as these take the brunt of any impacts from the side. Ensure that the plungers 

work freely and locate into the holes.

 

 

• 

Ensure that the IV Pole fitted is correct and the serial no. corresponds with the trolley serial 

no. located on the inside of the backrest board (see page 5 for location). Make sure there 

are no sharp burrs from misuse. 

 

 

Please register your product with us, via the Warranty Registration Form (see page 15), for ease 

of contact in case of urgent upgrades or recalls.

 

 

If the unit is damaged please do not attempt to repair as this could invalidate your 

warranty and could compromise its MR integrity and therefore safety, please call or 

email Wardray Premise Limited:

 

 

T: +44 (0) 20 8398 9911

 

F: +44 (0) 20 8398 8032

 

E

-

MAIL: sales@wardray

-

premise.com

 

 

Please include the product code and the product

s serial number when 

contacting Wardray Premise.

 

Содержание MR5501P
















Отзывы: