waratah HTH618C, Руководство оператора

Страница: 13 / 92

Safety: Maintenance Precautions
T7M7G6M,0000652 -19-24MAR21-1/1
Prepare for Service Safety
Warn others of service work. Always ensure all service
personnel and equipment are clear of the agreed work
zone. Failure to follow this practice could result in injury
or death.
Always properly park and prepare your carrier and
harvester head for service or maintenance.
Understand service procedures before beginning repairs.
Understand all the control levers and their functions. Be
familiar with and follow the recommended procedures and
safety precautions in the manuals. Keep the service area
clean and dry.
Whenever the engine must be running for service work,
two people are required. Establish a clear line of sight and
method of communication between them. Refer to the
appropriate reference manual for full operation details.
CAUTION: The harvester head can move
unexpectedly. To reduce the chance of injury,
always work from the side of the head.
Precautions
To prevent possible injury while performing any
maintenance or service work, prepare beforehand. Follow
safety precautions. Lower the harvester head to the
ground and stop the carrier engine. Turn off any master
shut-offs and do not allow personnel in the cab.
Maintenance and service general safety precautions:
1. Park the carrier on a level surface, and lower the
harvester head to the ground.
2. Lock the tilt frame in the harvesting or processing
position using the locking pin.
3. Deactivate the carrier’s hydraulic system.
4. Reduce the hydraulic system pressure to zero before
work on hydraulic components.
5. Stop the carrier engine and remove the key.
6. Attach a “Do Not Operate” tag in an obvious place in
the operator's station.
7. Turn the Waratah controller key switch to the Off
position and remove the key.
XJ131
1
171
—UN—24MAR21
1-3-1 090721
PN=13