waratah FLEX RAIL ELECTRIC, Руководство по установке

Страница: 3 / 12

1.
Strainer posts can be installed by either
augering a hole or by using a post driver.
All strainers should be adequately braced
using either a horizontal or diagonal stay.
2.
Mark on the strainer post where you want
each end bracket to be installed and drill a
10mm pilot hole. Do
NOT
attach the end
bracket to the post yet.
3.
For larger strainer posts, we recommend
using the Flex Rail
TM
end angle bracket, this
will ensure the rail sits in-line to the strainer
post.
45 degree
angle bracket
SIDE VIEW TOP VIEW
TOOLS REQUIRED:
Marking pen Tape measure
Drill 10mm drill bit
PREPARING THE STRAINER POSTS
End flat
bracket