27
Step 7: Fit the panels together (continued)
Drill holes for roof brace using 3mm drill bit. Then fix the roof brace as per the below diagram. Join the sheeting and the gable using
part L4 (lip) and then fix the 4 corners using 16mm self-tapping screws. (Do NOT fix central screw marked with a cross at this stage).
96
L4
L4
L4
L4
L4
G10
S31
After attaching both roof panels to walls as
shown, drill holes using 3mm drill bit for the
roof brace and fix it to the ridge beam and
channel above door as shown. Repeat the
same step for the roof side. Then repeat this
procedure for the rear wall roof brace.