WANHAO GADOSO REVOLUTION 2, Руководство пользователя

Страница: 17 / 51

First leveling
After leaving the factory, the GR2 is generally leveled and
debugged by WANHAO inspection personnel, and there is a lock
under the printing hot bed.
If you have used it for a long time in the future and need to
fine-tune it, you can use the following methods.
First open the settings - select Bed Levelling.
The picture shows that the thermal head has not yet started to be
heated. If you feel you need to re-adjust your printing distance
during printing, please follow the instructions.
Note: While waiting for the print head to cool down, do not touch
it to avoid burns.
Bed levelling
1. First unscrew the
3 fastening nuts.
5. After the print head
moves to the rear right,
adjust the distance in the
same way.
5. After you have adjusted the
distance once, the system will
remind you to confirm that you
have adjusted the 3 corners to
a level.
6. Congratulations on your
successful commissioning.
2. The print head will move to
the middle. At this time you need
to use a card and turn the nut to
adjust the distance between the
thermal head and the printer.
3. After the print head
moves to the left rear,
adjust the distance in the
same way
.
16