WANHAO Duplicator I3V2 Скачать руководство пользователя страница 3

Страница: 3 / 4

2.6 Move the steel rods off the locking

plate and move the aluminum block off

the rods.

2.7 Insert the 2 new plastic bearing block

into the 2 rods.

2.8 Re-insert the 2 rods back to locking

place.

2.9 Re-install the 6 locking bolts.

2.10 Re-install the extruder onto the

extruder plate and bolt it up.

Содержание Duplicator I3V2

Страница 1: ...e the Wing Nuts by Thumb Nuts 1 1 Push the heating plate and twist the wing nuts clockwise to unscrew wing nut 1 2 Twist the thumb Nut anticlockwise to tighten the thumb nut 1 3 Repeat 1 1 and 1 2 to...

Страница 2: ...2 3 Move the extruder off the extruder plate So you can see the 6 bearing locking bolts 2 4 Unscrew the 6 bolts So you can detach the extruder plate and the aluminum bearing blocks 2 1 Lose the 2 Fan...

Страница 3: ...d move the aluminum block off the rods 2 7 Insert the 2 new plastic bearing block into the 2 rods 2 8 Re insert the 2 rods back to locking place 2 9 Re install the 6 locking bolts 2 10 Re install the...

Страница 4: ...2 11 Tighten the 2 fan bolts 2 12 Re lock the set screw of the rods...