WANHAO Duplicator I3V2 Скачать руководство пользователя страница 1

Страница: 1 / 4

I3 V2 to V2.1 UPGRADING INSTRUCTION

1. Replace the Wing Nuts by

Thumb Nuts.

1.1 Push the heating plate and twist

the wing nuts clockwise to unscrew

wing nut.

1.2 Twist the thumb Nut anticlockwise

to tighten the thumb nut

1.3 Repeat 1.1 and 1.2 to replace the

rest 3 wing nuts with thumb nuts.

Содержание Duplicator I3V2

Страница 1: ...e the Wing Nuts by Thumb Nuts 1 1 Push the heating plate and twist the wing nuts clockwise to unscrew wing nut 1 2 Twist the thumb Nut anticlockwise to tighten the thumb nut 1 3 Repeat 1 1 and 1 2 to...

Страница 2: ...2 3 Move the extruder off the extruder plate So you can see the 6 bearing locking bolts 2 4 Unscrew the 6 bolts So you can detach the extruder plate and the aluminum bearing blocks 2 1 Lose the 2 Fan...

Страница 3: ...d move the aluminum block off the rods 2 7 Insert the 2 new plastic bearing block into the 2 rods 2 8 Re insert the 2 rods back to locking place 2 9 Re install the 6 locking bolts 2 10 Re install the...

Страница 4: ...2 11 Tighten the 2 fan bolts 2 12 Re lock the set screw of the rods...