AFTER SALES SUPPORT
86-571-23290996
Model :Duplicator 8 MARK I
27
11.Save a Scene
12.
Click to save the current object as a .STL file. The .STL format allows
you to prepare a scene to be printed repeatedly in the future, together with supports
and positioning.After models have been loaded and manipulated on the build
platform, the entire scene can be saved as an STL model for later use. These scene
files can be used to create a scene with supports, slice the scene, and later load to
print your scene without the need for re-slicing.
From this screen we will be able to control the motors of the printer , which means
displacing the build base over the Z axis, as well as controlling the LCD.In this section
of the Control screen we have the buttons that will allow us to move the Z position
of the build base. Using the value indicated as z Rate (at the bottom) you can change
the speed of progress measured in millimeters / minute.
13.
Others functions
Wall Thickness:
This field is to set the thickness of each slice in mm. The default is
.05mm (20 slices per mm)
Bottom Layer Count:
This specifies the number of ‘bottom layers’ that receive the
longer exposure time.
Exposure Time per Layer:
This time value specifies how long the projector will
display an image slice on a per-layer basis.
Bottom Layer exposure time:
In order to ensure the model is properly adhered to
the bottom of a vat, a longer exposure time can be used for a specified number of
bottom layers.
Light -off Delay:
This setting can delay the UV led lighting before starting to print.
Bottom Light -off Delay This setting can delay the bottom lighting before starting to
print.
Lifting Speed:
When a layer is printed on a bottom up machine, a large amount of
force may be required to separate the slide from the vat. This speed indicates how
fast to perform the lift, a slower speed may be required to help vat separation.
Retract speed:
After the lift occurs, this speed indicates how fast the z axis should
travel back to the initial start position.
Содержание Duplicator 8 MARK I
Страница 1: ...you can WANHAO Duplicator 8 USER MANUAL High Resolution Resin 3D Printer MARK I...
Страница 2: ......
Страница 29: ......
Страница 30: ...REV1 3...
