5 Install Power Supply
Now the next step is to give the Duplicator 5 power.This is done by attaching
the external power supply.
1. If the power supply has to be detached,the first step is to make sure the
Duplicator5S turned off.
2.The corresponding power cable (for your country) has to be inserted in
the power brick of the power supply.
3. The connector has to be inserted at the back of the Duplicator5S, in
the round hole next to the on/off switch and USB slot.The flat side of the
power plug has to face towards the top of the Duplicator5S.
