12
5.6 Filter tray replacement
5.6 Sweeping mode
Under normal circumstances, nozzle towards obliquely upward so as to avoid blowing
away sewage on the pool floor.
For some specific pools, sweeping mode could be used for blowing up debris located
in dead corner or fine particles so as to collect or filter them by main filter system of
the pool.
5.7 Helpful tips
i.
Unplug power connection immediately after use (Do not do it with wet hand or naked
foot).
ii.
The cleaner should not touch pool walls while lifting out to avoid scratching the pool
surface or any damage to the cleaner.
iii.
Before lifting out from pool and placing on the pool edge, suspend the cleaner above
water surface for 10-15 seconds to release the water left inside the cleaner body.
iv.
Please hold the cleaner handle to lift it out from pool and never pull the cable.
Press buckle to disassemble
Replace and press to assemble
