- 10 -
Inspection of Engine Oil
Inspect the engine oil level
（
Fig12
、
Fig13
）
1.
Keep the motor steady on the ground, screw up the oil dip rod
and clean it, then reinsert and inspect oil.
2.
If the oil level reach to down limit sign (2), replenish the standard
oil to the level below upper limit sign(3), then insert and screw down
the lid back.Check if it
’
s in good situation
Suggested engine oil number:
SAE-15W/40
Fig13
3
2
Fig 12
- 11 -
The free path of rear brake handle
（
Fig
14
、
Fig
15
）
Measure the distance of rear brake pedal before detent function,
The free path should between 10-20mm, take the tail of brake handle as standard.
•
Adjust nut
：
（
A
）
increase the distance of free path.
（
B
）
reduce the distance of free path
After adjust, the axle pin (2) should touch closely with nut (1) groove after adjust.
WARNING:
When the front disc gets worn to the limit (see the notice on the disc: MIN.TH.3mm),the
old disc must be changed in order not to influence the brake performance.
Fig15
Fig14
