W&H teon + RID-200, Руководство по эксплуатации

Страница: 119 / 160

Problem solving guide
119
Insufficient salt/Water softener
Problem Cause and remedy
Refill salt
Salt is running low in the water softener.

Refill the reactivation salt before starting the next pro-
gramme.
Machine locking out Insuffi-
cient salt Salt in the water softener is completely depleted and react-
ivation is no longer possible. The machine is locked for fur-
ther use.

Refill the reactivation salt.
Salt container empty, Pro-
gramme locked The water softener cannot reactivate because there is in-
sufficient salt. The machine is locked for further use.

Refill the reactivation salt.
The lock is lifted a couple of seconds after refilling the salt
reservoir. Reactivation will occur automatically during the
next programme sequence.
Salt container lid not properly
closed
The salt container is not closed properly.

Close the container properly.
Salt residues are preventing it from closing.

Remove all residues from the funnel, the lid, and the
seal.
Do not use running water as this can cause the salt
container to overflow.

Close the container properly.
The salt container flap has sprung open during a pro-
gramme.

When the door is opened, hot steam and chemical
agents can escape!

Open the door and close the container flap.