W&H Med MN-111 Скачать руководство пользователя страница 12

Страница: 12 / 100

Safety information

Lexa | Instructions for Use | MN-111 Med ENG Rev14 | 03/04/2023 | © W&H Sterilization Srl

CONTENTS

This section deals with the following subjects:

Safety warnings

Responsibility

Safety warnings

THERMAL HAZARDS

The chamber automatically begins to heat to
high temperature as soon as the sterilizer is
switched on – risk of burns!

The trays and the sterilization load are hot at
the end of each cycle. Use tray or cassette
holders to empty the sterilization chamber.

Always wear appropriate PPE during use of the
sterilizer (e.g. gloves for cleaning, maintenance,
etc...).

ELECTRICAL RISKS

Do not pour water or any other liquids over the
sterilizer (risk of electrical short circuits).

Switch off the sterilizer and unplug the mains
cable before inspecting, carrying out
maintenance or servicing the sterilizer.

Ensure that the power receptacle the sterilizer
is connected to is properly grounded.

All electric devices connected to the sterilizer
shall be of Insulation Class II (double insulated)
or higher.

Use only the power cord provided by the
manufacturer.

IMPROPER USE OF THE STERILIZER

The sterilizer must not be used in presence of
explosive or flammable gases, vapors, liquids
or solids.

The sterilizer has not been designed for the
sterilization of foodstuff or waste.

Do not exceed the maximum load weight limits
as specified in this manual (see "Run a
sterilization cycle" on page 48).

Do not drink any water that has been inside the
sterilizer.

Содержание MN-111





































































































Результаты поиска

Содержание MN-111

Отзывы:

Похожие инструкции для MN-111

Бренды по названию

Популярные бренды

W&H Med MN-111, Инструкция по эксплуатации

Результаты поиска

Содержание MN-111

Отзывы:

Похожие инструкции для MN-111

Бренды по названию

Популярные бренды