Wanderer
Astro
2
2.Installation
Pass the included nylon cable ties through the two slots of the WandererCover
V3 and tighten them, and fix the WandererCover V3 on the telescope tube or dew
shield. If the length of the cable tie is not enough, connect two cable ties together.
If the current angle of the flat panel is not suitable for installation, please follow the
steps below to install the WandererConsole and temporarily open the flat panel to
the middle position before installing. Connect WandererCover V3 to the computer
with the included USB2.0 cable (the USB port needs to be able to provide about 1A
current), and everything is ready.
2.1 Control via WandererConsole
Visit the
to download the latest version of the
WandererConsole compressed file, and double-click setup.exe to install it after
extraction.
After the installation is complete, start WandererConsole and find the Flat Panel
interface. Find and select the COM port of WandererCover V3 in the drop-down bar
on the left, check “V3” below, and then click Connect. (figure1)
