Cory Wong Compressor
Dual Compressor and Boost Pedal
with switchable boost modes and XLR output
Attack
– Controls compression response - counter clockwise for fast attack, clockwise for slower attack.
Volume
– Adjusts the output level of the Compressor circuit, full clockwise is maximum volume.
Tone
– Add more presence to your tone by dialing this in clockwise for added brightness.
Blend
– Control the strength of the effect coming through. All the way counterclockwise the signal is
100% dry but will slowly increase to 100% wet as the controller is rotated clockwise.
Sustaaiin
– Dial in clockwise to add more sustain to your guitar tone to alter how long a note rings on.
Boost
- Controls level of boost when footswitch is engaged, rotating clockwise increases gain.
Boost Mode Switch
- Select either a flat frequency or a rich, saturated mid boost.
XLR
- Connect direct to mixing desk / pa / audio interface with a separate XLR cable.
Ground Lift
- Engage this to lift the ground if connecting the XLR adds noise.
Comp On
- Engage this to permanently enable the compressor circuit (bypass becomes inactive).
Power:
This pedal was designed around the usage of a 9V DC power source only. To avoid
damage to the pedal, do not exceed 9V DC, do not use center pin positive adapters, and do not
use AC power. Use only a 9V DC power source that is intended for guitar pedals. This pedal draws
approximately 30mA at 9V.
Cory Wong is a Grammy-nominated artist renowned for laying down some of the finest
grooves across all genres. The Wampler Cory Wong Compressor is at the heart of his
legendary tone. This is more than just a Compressor and a Boost pedal. This is a dynamic
toolkit that shapes your tone with sparkling cleans and responsive compression either
direct to your amp or straight into your recording interface.
This is a dual footswitch Compressor and Boost pedal with: Wampler’s legendary tone
shaping controls; a Boost mode switch for either a flat frequency or rich, saturated mid boost;
unique “Comp On” mode to bypass the footswitch; and an XLR port for connecting direct to
an interface, powered monitor, or PA system. Prepare to find the funk.
@WamplerPedals
@WamplerPedals
/WamplerPedals
YouTube.com/user/WampCat
visit wamplerpedals.com for full manual and product videos
