Wampler TERRAFORM, Полное руководство пользователя

Страница: 9 / 22

WAMPLER TERRAFORM Page 8
Those of you who are eagle-eyed will have noticed we said “global”
when talking about allocating PRE/POST – this is how each effect is
placed by default. But… if you desire… you can go one stage further
and allocate each effects in its PRE/POST position according to each
preset … so, no matter where you have placed the effect globally,
you can change it to the other ‘side’ for any particular preset!
Here’s how you do it…
1. Set the effect settings the way you’d like, and then press
and hold the preset button to initiate a preset save.
2. While the preset LEDs are blinking, the bypass LED will
light green or blue to indicate the pre or post position of
the current effect. This will most likely reflect the global
setting .
3. Press the bypass switch to assign the preset to “pre”, or
the tap tempo switch to assign it to “post”. The bypass
LED will change color accordingly.
4. Press and hold the preset switch to save the preset (along
with the new pre/post setting).
5. Now, when you load the preset you just saved, the
pre/post setting will be loaded with it, instead of the
global pre/post setting for that effect.
6. NOTE: this new pre/post setting only applies to the preset
that was just saved. Using the program knob to change
programs will load the global pre/post setting for each
effect. Please see the respective section to change the
global pre/post setting.
NOTE: if you are using the pedal in normal/stereo mode,
these settings will have no effect on the routing of your
effects (although the bypass LED will still light green or blue
when you are saving a preset. You may ignore these
settings).