background image

Tone 

– Coming after the crunch engine of the pedal, the Tone control 

allows you to dial in the perfect amount of highs. Since it is after the 

clipping section of the pedal, its affect on your sound is strictly shaping 

the highs to taste. It has a large range of adjustment, and for best results, 

start at zero and add highs until you have the level of treble and presence 

that you're after. Raising the Tone knob will also raise the volume level, so 

account for that in the adjustment process. Whether you want a smooth 

high frequency profile or clear, precise notes, this control will get you 

there.

Bass 

– Coming before the crunch engine of the pedal, the Bass control 

allows you to adjust the low frequencies, but as you raise it more and 

more (especially past 1 o'clock), it can alter the fundamental character of 

your notes' low frequencies. It also adds more gain to the pedal as it is 

raised, since it's letting more of your low frequencies through to whichev-

er gain mode you've selected. At higher settings, the Bass control can give 

you a warm, almost fuzzy character to the low frequencies, a smooth 

sound that makes chords fat and gives single-note runs a smooth fluidity 

unmatched by virtually any other pedal out there. Combining the Bass 

and Tone controls, you can dial in very precisely how you want your EQ, 

and the range of options is profound indeed.

Gain 

– A straightforward control, this just adjusts the level of crunch 

desired. As you raise the Gain, pay attention to the Volume control and to 

the Bass knob. More gain will give you more volume, so keeping your level 

where you want it will mean adjusting them together. Since the Bass knob 

does have a profound impact on how much crunch you get in the lower 

frequency notes and that in turn can change the whole character of your 

overdrive or distortion sound, make sure to adjust the two controls 

together. And of course the Gain knob is profoundly related to the 

three-way toggle switch that adjusts between gain modes.

Smooth/Open/Crunch Toggle Switch

 – These three switch positions each 

represent a totally different internal gain pathway. They change the drive 

in very fundamental ways. Smooth is the most "D"-amp style sound, with a 

great degree of presence and tremendous touch response. Open comes 

with a substantial volume boost, and has the most forward, least driven 

sound of any of the positions. Crunch is, true to its name, the crunchiest, 

higher gain side of the pedal, and with adjustment it can really get going! 

Each of the three switch positions should be treated like a whole new 

variation on the pedal, because in fundamental ways, they are. Dialing in 

the best sound for each will come down to your ears and to experimenta-

tion, but understanding how the other controls affect each-other should 

arm you to get great sounds from the Euphoria in any of its three great 

drive modes.

Power Requirements

The pedal can be powered by a 9V battery. The battery terminal is located inside the pedal. If 

using a power supply, power needed for the pedal is 9V DC, regulated, center pin negative, as 

supplied by most standard Boss™/Ibanez™/Etc. supplies. The pedal can be safely powered with a 

multi-supply, like the Visual Sound 1SPOT™. The pedal was designed explicitly around the usage 

of a 9V DC power source, and is intended to sound its best at 9V. To avoid damage to the pedal, 

do not exceed 18V DC, do not use center pin positive adapters, and do not use AC power. Using 

an incorrect power adapter can lead to damage and will void the warranty on the pedal. This 

pedal draws 

8mA

.

Please note

: If you are using a battery, it will drain when the input cord is plugged in.

Return and Warranty Policy

For direct sales, there is a 14-day “no questions asked” period where you may return the pedal for any reason, provided that it is in its original condition. Please retain 

all packaging within this period in case you decide to return it! We only require that you pay shipping back. The 14 days start when you receive the pedal. 

This does 

not apply to dealer or retailer sales – see their individual return policies for specific information

.

All Wampler Pedals, Inc. pedals carry a 5-year, fully transferable warranty that covers defects due to parts and labor. The warranty begins at the point of purchase. 

Please remember to register your pedal as soon as possible after purchase at the following web page to ensure quicker service if you should ever need to make a 

warranty claim: 

www.wamplerpedals.com/warranty_registration

For warranty repairs or questions, please feel free to contact us at 

www.wamplerpedals.com/contact_us.html  

Toggle set to Smooth: Gain at 2-3 o'clock (or higher!), Tone at 

Noon, Bass anywhere from noon to 3 o'clock to soften the low 

frequencies and make flying through notes sound and feel 

easy as can be.

“D” - Ford

Light and Glassy

Crunchy Drive

Toggle set to Crunch: Gain at 1-2 o'clock, Tone at 11 

o'clock, Bass at 11 o'clock-Noon

Open but Refined

Toggle set to Open: Gain around 10 o'clock, Tone at 1 

o'clock, Bass at 9-10 o'clock

Suggest

ed S

ettings (v

olume t

o suit) 

Any trademarks attributed that are not owned by Wampler Pedals, Inc. are for 

demonstrative purposes only, and are property of their respective owners

Отзывы: